Real Time Test Controllers
TDX
The TDX controller range is developed and assembled in Italy, using the most advanced technology available worldwide, making it an essential solution for accurate and reliable structural mechanical testing.
The TDX controller is available in two versions: TDX-1 for single-axis applications and TDX-2 for biaxial applications. Both models can perform static and cyclic tests in Force, Displacement, or Incremental Encoder control modes.
In addition, four read-only analog input channels, synchronized with the active axis or axes, further enhance the controller’s capabilities.
The TDX controller line is designed to be paired with Litem electrodynamic, electromechanical, and torsional testing machines, and can also be used for the retrofit of existing systems.
Applications
- STATIC YIELD/FAILURE TESTING on composite materials and dental implants, etc.;
- STIFFNESS TESTING on single and assembled components, metal, plastic and composite material products, 3D-printed and biological material products;
- DYNAMIC TESTING with sine, pulsed square wave with settable duty cycle or constant speed triangle wave (e.g. for characterisation of suspensions/shock absorbers);
- CONSTANT AMPLITUDE FATIGUE TESTING to determine the life under cyclic/repeated loads for any type of component (Wöhler curves);
- CONSTANT AMPLITUDE BLOCK FATIGUE TESTING for the determination of the Palmgren-Miner relation and of the actual damage value;
- VARIABLE AMPLITUDE FATIGUE TESTING using the reproduction/simulation in the laboratory of real world load curves acquired on-site;
- REPRODUCTION OF LOAD CURVES Defined by the user during design phase, simulation of seismic tests.
GALLERY
